June 22, 2021
Differences in pottery and porcelain, separation and care
Ceramics and porcelain, both vessels are not very conscious,BotherslikeI think that there are many people who are textured as ceramic and bakers, or those who are chosen these products in how to use the manufacturer's recommended according to the application.
Of course I do not make a mistake, but it is not possible to understand the difference and characteristics and characteristics and characteristics of everyday life, and know how to work more fun?
Of course I do not make a mistake, but it is not possible to understand the difference and characteristics and characteristics and characteristics of everyday life, and know how to work more fun?
Difference in raw materials
None of the pottery and porcelain are mainly clay(clay), Furishi(Cow), Salite(Crisis)And other raw materials. Pottery is a soft and plasticous earth-derived clay5While it accounts for about a total of, the porcelain is a raw material from a low plastic potential pottery.3It occupies around. Therefore, pottery is said to be "soil" and porcelain "stone".
In addition, when making the shape, the pottery is made thick, and the porcelain raw material is less likely to be broken and thinned.
In addition, when making the shape, the pottery is made thick, and the porcelain raw material is less likely to be broken and thinned.
porcelain
Missen Yellow Rose
Missen Yellow Rose
Difference in baked temperature
Pottery is generally1200It is fired below. Since the rate of clay is high in raw materials, the substrate is rough and the non-visible small holes are in place, and there is water absorbing.
Porcelain is higher1200～1400I bake at a time, but the raw material clay is tightened, and silica and feldspars are linked and become glass. The baked porcelain is not water-absorbent and the surface has a sloppy tactile like glass.
Pottery is generally1200It is fired below. Since the rate of clay is high in raw materials, the substrate is rough and the non-visible small holes are in place, and there is water absorbing.
Porcelain is higher1200～1400I bake at a time, but the raw material clay is tightened, and silica and feldspars are linked and become glass. The baked porcelain is not water-absorbent and the surface has a sloppy tactile like glass.
Characteristics and use
Because of the thick ones, there are many thin holes, so heat conduction is slow, and it does not struggle even if you put a hot one in the bowl. In addition, while it is difficult to heat, it is difficult to cool, and pottery is active in cooking such as hot pot and bibimba.
In addition, if a piercing plate, a cold soba soba, etc. is a porcelain, it is also very good that the temperature of the ingredients will be transmitted. In addition, more hard porcelain is directed to Western dishes with knives and forks.
Care
Pottery is glazed to suck water(Raw)If you are not coated with a feeling of seasoning or oil for a long time, it may become stain if you put a lot of seasoning and oil. After use, wash with neutral detergent as soon as possible and stop using bleach. On the other hand, the porcelain does not water absorption, so dirt can be dropped.
Care
Pottery is glazed to suck water(Raw)If you are not coated with a feeling of seasoning or oil for a long time, it may become stain if you put a lot of seasoning and oil. After use, wash with neutral detergent as soon as possible and stop using bleach. On the other hand, the porcelain does not water absorption, so dirt can be dropped.
In addition, it may be more likely to be able to use the ceramic in a microwave. Although it is not a mistake, the ceramic is weak to heat or cool, and it may cause it to repeat the use in the microwave. If you are painted, the coating will progress, and if you put it in the range of gold and silver, it may also cause fire. If you want to put it in the microwave, carefully check the response status of the product label.
Each feature: Summary
|
|
Pottery |
porcelain |
|
material |
clay(From earth), Silica, feldspars |
clay(Stones), Silica, feldspars |
|
Firing temperature |
1200 degrees or less |
1200～1400Every time |
|
Water absorption rate |
10％ |
0％ |
|
Texture |
Sarazala |
Tully |
|
Transparency |
Translucent |
Translude |
|
Thermal conductivity |
It is hard to heat, it is difficult to cold |
easy to heat up, easy to cool down |
|
hardness |
Slender than porcelain |
hard |
| Sound when hitting | Dull, low | Sharp, high |
Recommended ceramic manufacturer
1. Noritake
In 1904 (Meiji 37), it was founded as a Japanese pottery combined company, and today, the world's top ceramic manufacturer. Also,Japan pottery combined company,Besides Noritake, a high-quality western brand called Okura Ceramic Garden is also developing.
1. Noritake
In 1904 (Meiji 37), it was founded as a Japanese pottery combined company, and today, the world's top ceramic manufacturer. Also,Japan pottery combined company,Besides Noritake, a high-quality western brand called Okura Ceramic Garden is also developing.
2. Kyoran company
A long-established store of Arita-yaki who boasts a history of over 300 years. We line up interior accessories such as dishes and vases.
A long-established store of Arita-yaki who boasts a history of over 300 years. We line up interior accessories such as dishes and vases.
3. Missen
Name of the porcelain produced in the Missen region of Germany. The white magnetic vessel from the Toyo was around the 17th century and was a longing gem in the West. This German Masan Missen was the first successful production of hard porcelain in Europe.
4. Royal Copenhagen
Denmark ceramic manufacturer. At that time DenmarkIt was established as a royal royal tuner. We collected trust from royal and upstream classes around the world with a delicate and beautiful work. In addition, the Flora Danika series, which is painted with the plants of "Flora Danika Plant Planned Book", and the same pattern does not exist is called a timeless masterpiece.
We also sell and buy domestic and foreign branded tableware other than the above brand. If you have any unwanted, you will be able to sell Nishikino.